the qobuz webapp is hi-res too, I just use it in Firefox and my dac reports the same bit/sample rate that qobuz does. AFAIK there’s no compression there though I haven’t extensively verified that, only that the end result is 24bit/192kHz if that’s what qobuz says is playing.
EDIT: Also, qobuz is nice because there’s very few things you can click on in the web interface which cause the music to stop playing. I really appreciate that feature… looking at you bandcamp…
Yeah, it changes without skipping a beat for me in pipewire, even in things like zoom/teams.
I use a little oneliner with tofi (rofi/wofi would also work) to select the current output and avoid pavucontrol. It’s mapped to a sway binding but would probably work in any wm/de:
pactl set-default-sink $(pactl list short sinks |awk '{print $2}' |tofi $tofi_args)
I’m using pipewire so the functionality of pactl is actually provided through pipewire-pulse I think
Gatgetbridge (your link) has a breakdown of devices they support https://gadgetbridge.org/gadgets/ . You can click through the vendors to find devices which are both “highly supported” and “no vendor-pair”. Meaning most/all the features work without any reliance on the vendor app.
As for the similarity you are asking about with pixel->GrapheneOS, there are very few watches that can run an alternative open source firmware or operating systems apart from the ones that are already open source, like bangle.js, pinetime, etc. Wearables are even more specialized than phones, they require specialized code designed specifically for them and would likely require pretty extreme effort to reverse-engineer.
I use a pebble 2 HR with gadgetbridge but the watch it self runs the old pebble firmware which gadgetbridge talks to. This is fine for me, but if you are looking for a more modern watch you may have to make some compromises.
Interesting, it is working for me in wayland and the drop down menus are fine but I’m using sway which is a totally different wayland implementation than what KDE is doing. I’m glad you found a workaround.
Unfortunately I don’t know what is causing the exact issue you are having, however here are a few things I found when doing this myself that are “gotchas” (not immediately obvious).
This is the reason your fonts are all Times New Roman. Go to that key using protontricks regedit and delete all the font replacements.
Anything you put in $HOME/.steam/root/steamapps/common/assettocorsa stays there, even if you uninstall the game. If you want to “start over” you have to uninstall the game and then delete the whole assettocorsa directory there, and the wine prefix in $HOME/.steam/root/steamapps/compatdata/244210
AC and content manager work without .net changes in the latest GE but you do need corefonts which you can install with protontricks. If you want to be extra sure you have the right .net you can install dotnet472 but I don’t believe this is necessary anymore as it will be installed automatically or is already installed. You may get a wine .net error the first time you launch the game but it’s only the first time.
If you choose to use CSP you have to unzip the archive you get from either Patreon or acstuff.ru and manually copy the dwrite.dll file into $HOME/.steam/root/steamapps/common/assettocorsa on EVERY upgrade. The zip installer built into CM doesn’t do this correctly on Linux. It will cause rain not to work if you choose to use the Patreon version if you don’t do this manual step.
I think you should start over and make sure the assettocorsa directory is clean before re-installing the game. It could be missing fonts, but it’s hard to say. You can back it up somewhere if you have data in there you need.
AOSP gallery that comes with GrapheneOS. The app info says it’s called com.android.gallery3d. There’s some info here in the docs about the relationship between camera, edit functions, and the gallery app.
No, I don’t have markup installed (it is there in apps but not installed from the mirror).
I think in my case the screenshot functionality is built into AOSP and the editor you get when tapping the resulting preview overlay in the lower left corner of the screen is part of the “gallery” app since using the “edit” feature from gallery launches the same editor. Maybe GrapheneOS just sets that as the default editor, I’m not sure.
What android OS do you use? On stock Android 14 (GrapheneOS, but it’s not a GOS feature) this functionality is built into the stock screenshot tool.
pwr+voldown -> tap screenshot that appears in the overlay after you take it -> tap the crop tool . I suppose step three could be removed but what if you want to do something that isn’t cropping? There are lots of other features so at some point you have to tell the tool what you want to do.
broad support for generic smart watches
Gadgetbridge is pretty well on it’s way to this. They roll out support for new devices monthly it seems like. Of course there are always feature X and Y that fitbit or garmin does that it doesn’t, but it’s quite an impressive project. I use it with a pebble 2 HR.
“An attacker would need to be able to coerce a system into booting from HTTP if it’s not already doing so, and either be in a position to run the HTTP server in question or MITM traffic to it,” - Matthew Garrett
Summary left out a quite important bit.
Mosh hasn’t had a release in quite a while (Oct 2022). While that’s not that old, and there does appear to be somewhat active development, it’s a little slow moving for something that might be open to the internet directly. I used to use it but ssh with tmux is mostly fine and makes me feel a little safer because of their wider use.
I use FreeCAD and Assembly3 for everything and have for many years now. I sometimes use realthunder’s fork of FreeCAD but right now it’s quite a bit behind upstream and there are some cool new features in sketcher so I use upstream for those.
Some people get confused about workflow in FreeCAD because there are so many options and every youtube video has different opinions or tries to feature a particular workbench like curves or something. My opinion… Pretty much your workflow starting out should be to ignore everything else and use part design and sketches, it’s the simplest way:
enable autosave with a short interval, like 2min
Switch to part design workbench
create body
create sketches as the base of the features of your part attached to the xy, xz, yz planes, offset them to create a “wire frame” that resembles your project
a. Your sketches should be fully constrained
b. Your sketches should have as little geometry in them as possible, if you need more complex stuff make more sketches
c. Your sketches should have closed wires, you can’t pad something that doesn’t create a face.
use pad, pocket, revolution, loft, and hole operations on those sketches to form a 3d solid
if you need to create additional sketches which import geometry from the previous operations (using the external geometry tool), import SKETCH geometry from the previous ops, not edges of solids, whenever possible. Hide your solid, unhide your sketch, select that with the external geometry tool.
a. Use sketch on face sparingly.
Do fillets and chamfers last, if you need to change something, delete them and recreate them once you’ve made your changes.
To make multiple parts make multiple bodies with the same workflow as above.
Once you get pretty good at making static parts with constrained geometry, holes, threads (with the hole function), etc, which you can do with only the stuff above, then you can branch out into other workbenches like assemblies or curves, but all of those things build on the concepts above, so it’s easy to get overwhelmed if you try to do it all right from the start. Learning how to recover from a mistake is just part of CAD in general, though I admit that it’s a bit more effort to find what’s wrong in FC vs commercial platforms, but we aren’t here, on lemmy, in a linux community, to use commercial platforms.
AFAIK that’s pretty much the same workflow as F360 uses for single-solid parts though things have different names. pad=extrude for example.
It’s obviously far from perfect but in my opinion it’s the best solution that runs natively on Linux and is actually open source. Also assembly3 uses solvespace as it’s backend solver so if you make assemblies using that you are kindof using solvespace too.
Also, I hear/read a lot of complaining about instability but I’ve honestly never had a crash that wasn’t on an experimental branch like RT or the edge release of upstream. However step 0 above should help if you’re worried about that.
Dark mode back in the day (XP/Vista era). I wanted to theme everything and have cool UI/visual features in a non-shady download-this-third-party-totally-safe-theme-engine-wink-wink way.
I’ll be honest, I did not expect to ever hear another person mention Foobar2000 ever again. And now to learn they have an android app!!! Hmm, may have to use that for a bit just for nostalgia sake.
I also use Vimeo for videos I can’t send directly to people or host my self. For example if I post a FreeCAD howto I put it there so I can link to it from comments and stuff and I know everyone will be able to play it. While it’s not open source, It’s really pretty great as an alternative platform with all the youtube like features and more (you can change your video title if you make a mistake for example).
I have a whole Linux machine with a bunch of displays, 16 cores, tons of memory, powerful GPU, and an internet connection. And I still have a TI-84Plus sitting on my desk which I use for all my calculator needs… It’s just easier.
Not sure why all the downvotes, I use the note to self function for exactly this type of thing all the time. Though to be fair signal is both on my phone and on my computer basically all the time because I use it to talk to everyone too…
EDIT: oh, it’s downvoted because this is the selfhosted community…
The really hilarious thing to me is that the NextPush app (unified push provider that can be run on your nextcloud server) is unsupported by nextcloud talk. But it is supported by a bunch of other competing applications.