It’s a lot for the homeland, but I love zabbix
It’s a lot for the homeland, but I love zabbix
Fair, my home office is a monument to too much free time, a hoarding habit for ewaste, and a wife who works weekends and overnights.
That is a self-made soldering kit box I made when I was in college and had to haul it around a lot. I have actually been meeting to replace it with something more permanent now that I’m a grown up with my own house. I have an air flow soldering rig which doesn’t really have a home, and I could have a much better use of space. I have my brocade ICX6610-24 next to that which I’ve been programming for way too long, and a whole bunch of 3D printer parts on top of that.
I’ve done some of that, recently I have an old putty knife and I will put it right against the crack and just hammer it which will unstick it enough that I can pull it off. Newer drives definitely have weaker magnets than some of my much older ones.
I started collecting in probably 2007, so manufactured before that for sure.
That’s rad, and you did an amazing job keeping them whole. Recently I have been wrapping them in cloth, then the kids form clay around them for various fridge and office magnets.
For sure for sure. What is your preferred mechanisms for feature requests? Small things, like in the browser pane, could we get buttons to launch terminals directly in the connections tree on the left, so I can launch the terminal without having to open the file browser for that connection, or likewise, adding a link in the connections pane to jump straight into the file browser? I envision a workflow where I keep 1 view open and can launch into file browsing or terminal directly from that view.
Have you considered embedding a terminal editor in the actual program? I use mRemoteNG on windows, and the integrated rdp/ssh with a sidebar full of bookmarks is the dragon I’ve been chasing on linux.
If this had remmina and vnc, and could embed terminals, it’d be a huge feature jump in my book (though it’s already great as a better way to manage my ssh sessions)
They used to be but I’m not sure now; I think when they release the full self-manufactured ones I will want one.
I have had an s76 wild dog which was amazing for an 11 year run, and I just replaced that with a meerkat. I also have a thelio which has been flawless. System76’s desktops are amazing.
In 2013 I bought a darter and it’s the worst laptop I’ve ever owned. I went through 4 keyboards and still it doesn’t work, also the wifi radio is under the keyboard and you get a 50% signal reduction when typing. It had one of those trapdoor Ethernet ports which broke, so I basically became a dead device. That is an old metric, but it scared me off from buying laptops from them until they get their own hardware pipeline for them.
I don’t have the exactly solution for you, but I went through this a while ago and came up with using openLDAP for this. It’s not tidy at all, but it was a tremendous learning experience, and I documented it in 2 blog posts which may be interesting to you; I doubt you’ll want to do what I did, but it was informative and has worked flawlessly since. I documented some of the flaws I found in options I considered at the time:
https://www.surfrock66.com/openldap-kerberos-and-sasl-my-experience-in-the-homelab/
I think discovery seasons 1 and 2 were fine and help as a precursor to snw which is great, but for sure skip discovery seasons 3 and 4
I’m not an expert, but I’ve been using TrueNas Scale since I cut over from TrueNAS core, and before that Freenas, since about 2010. I have a bunch of lessons and assumptions, but someone can correct me if these are misguided, they’re my tl;dr of knowledge.
You mention Jellyfin…my struggles with that were never storage. My struggles there were networking; it was a big part of why I decided to upgrade my server networking to 10G, which supported running Jellyfin on another hypervisor and having all that go over the network.
For a long time my setup was mate with Compton and awesome but I had to switch to just mate as my family and kids started using the computer more. Mate’s gtk suite is lightweight and complements awesome well as it gets out of the way, and caja/pluma/etc worked well with very few rough edges.
I have been trolling people for years with passionate wat-too-serious arguments that the rainbow is ROY G BAP for blue and purple.
I agree, I had a darter that was garbage…but both my wild dog and thelio have been spectacular, and I trust their hardware and PCB dev absed on success in the thelio custom PCBs and launch keyboard. I think judging them by their clevo rebrand isn’t as valid as judging them by the launch and the thelio. If I needed a laptop, I’d strongly consider this
For most systems, ext4 because it seems stable and uncomplicated.
For my NAS and big data, ZFS. People whose opinions I trust recommend it, and to the best of my technical ability to evaluate said things, the claims make sense and seem to be extremely beneficial against the threats I perceive to my data.
The pi4 especially is great for proof of concept or MVP testing, but I often migrate to VMs on my proxmox hypervisor once something becomes critical. I started Shinobi, pihole, and home assistant on a pi4.
Tt-rss though the developer can be a bit abrasive if you go asking for help. Been using it since the icanhaz days.
I built my kids potato computers from the time they were 3-5, which was during covid. They need computer skills nowadays, and it put them at an advantage for covid school. We got them on java Minecraft which was huge for reading, typing, and some basic math skills (they figured out multiplication for crafting things like doors). I made a chart which had icons of things they want, with the word next to it, so they could search and type in creative.
We used Ubuntu Mate. It’s simple, stable, and familiar. They do NOT have sudo on these boxes. As we’ve advanced, they now have firefox (behind a pihole which upstreams to opendns’ family protect), gimp (with a wacom tablet!), inkscape, calculators, tenacity, libre office, and they’re starting to get into some cad to make things to 3d print. You have to come to terms with doing a LOT of patient hand holding, but it has paid off dividends.