It is a It’s always sunny in Philadelphia reference: The Gang Buys a Boat / Wikipedia.org

I have enough people I dislike and disagree with IRL, I will have all my opinions confirmed when I’m browsing online, thankyouverymuch. /s

The seller mentions the drives are fully tested, but does not offer a warranty, aside from the Ebay 30-day return policy.

I left a comment to the Ebay seller and asked the same question, but I did not get a reply.

Ah yes ! I just fixed that. Thanks.

What do you use for the bit-by-bit test and how long does it take (depending on disk size) ? I have read about badblocks and that it could take an entire week to test one drive of 12TB, I didn’t have the patient to do that. The long SMART test already took nearly 20 hours in my case.

Thank you

Thank you ! It was a cool design project, but I ended up no publishing the design as it is quite difficult to assemble and work with. here are a couple more photos:

The black box with white front and blue LED lights, yes. I designed and built it myself. The case is made of laser-cuted plexiglass and 3D printed parts. The front plate is PLA, internals are PETG. It’s build around an ARM Single-Board Computer: NanoPi M4V2 with a SATA extension hat.

In a previous post, some were recommending me to use helium-sealed drives for lower noise. The disks I’ve bought are helium-sealed, but they are definitely a little louder at 7200rpm than 5400rpm drives. It’s still acceptable.

I love jellyfin, it’s great ! I haven’t played with Plex much to be honest, so I can’t really compare

My media collection is not backed-up, expect for the spare disks I have now. My photos and documents are encrypted weekly and sent to pCloud. They are also synchronized to my computer and phone with Syncthing. This way the important files are protected by 3-2-1.

why not btrfs send | btrfs receive? is there some advantage to rsync?

I didn’t think of this. I am familiar with rsync, I went with it without searching for alternatives.

did you hotswap the drives after each btrfs replace or shutdown and then swap?

I did the swap with the system powered down. I don’t know if my the NanoPi + SATA hat support hotswap.

what’s your host OS and do the drives spin down if inactive?

The NAS runs Armbian. The disks are configured to spin down, yes. I don’t know if this caused me the issue while replacing disk 2. I suppose not, since during replace the disks are all reading continuously. But I don’t know for sure.

Edit: fixed copy-past mistake with quoted sentences

I guess I got lucky with this batch, they all seem to work perfectly. But only time will tell if this what truly a good deal.

This may be a simple coincidence. Maybe you had similar YouTube suggestions in the past but you didn’t pay attention because they come at random times. Like if you drive a Honda Civic, you tend to spot all the Honda Civic in the street.

There would be an interesting experiment to make though:

1. Take a snapshot of your YouTube recommandations
2. Choose a subject that has nothing to do with any of the recommandations, let’s say “travel to the Bahamas”
3. Hold a conversation with someone with both your phone’s present, mention several time going to the Bahamas.
4. Check YouTube again, si if the topic of Bahamas is appearing.
5. Choose another topic not covered by your recommendations, let’s say collecting stamps
6. Put your phones away, have a conversation about collecting stamps
7. Check YouTube recommandations

The client for Android TV works very nicely. Maybe there is a way to use the same UI on consoles?

I feel like outdated software on the stable distro like Debian has become less of a problem with the development of flatpak.

Ardour is definitely professional grade, but I must say that it’s far from simple to setup. First, you may not have the latest version available in you SW repository and you would have to compile it yourself! Then, despite all the progress brought by pipewire, audio config in Linux is complicated and unreliable, especially for this time of work, requiring different audio devices, MIDI control interfaces and VSTs.

I am not an audio professional, I’m an amateur, and found myself demotivated by the amount of work required until I am ready to create music, and finally gave up :(

You do not need specific hardware to use passkey. For example you can use a password manager like Bitwarden and have your passkeys sync between multiple devices, including a good old regular computer.

Specific hardware car be use to secure how the passkeys are stored. For example, smartphones usually have a security chip that help s with storing encrypted data.

No, the cryptographic keys used in passkey are not just very long passwords. In face they are not so long. Typical keys generated with ed25519 are 60 characters long.